Stord Works High Efficiency and Low Steam Consumption for Further Processing of Cereals

• After-sales Service: Support Online
• Warranty: 1 Year
• Movement Way: Agitation
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Atomization: Rotary Atomization
• Flow: Parallel Flow
• Heating Mode: Radioactive
• Material Status: Powder
• Drying Medium: Superheated Steam
• Operation Pressure: Atmospheric Pressure
• Operational Method: Continuous
• Voltage: 220/380/440/as Per Design
• Power: 90kw
• Dimension(L*W*H): as Per Design
• Construction Material: Carbon Steel or Stainless Steel
• Motor Brand: ABB /Siemens/China Top Brand
• Heating Source: Steam
• Evaporation Capacity: 400 Kg/H
• Heating Area: 50 M2
• Steam Pressure: <=1.0 MPa
• Steam Temperature: <=185
• Transport Package: Standard Export Package
• Specification: as per requirement
• Trademark: Stordworks
• Origin: Jiangsu. China
• Production Capacity: 30sets Per Year

Product Description

    With regard to the structure of tube bundle dryer, a rotatable heating tube bundle is installed inside the fixed shell. Steam flows into the tube via the rotary joint for heat transfor, turns into condensate and then is discharged. The moisture in the material is heated outside the tube and turns into steam and then is discharged by a negative pressure fan. The material is threw away in the tube bundle by shovels, evenly falls to the outside surface of heating tube, and is pushed from the feeding inlet end to discharging discharging outlet end to achieve good drying effect.

    Tube bundle dryer has been widely used for drying loose material in the chemical industry, light industry, food, further processing of cereals, feed and other industries, such as corn starch germ, protein power, fiber and feed; alcohol and vinasse; bone meal, fish meal; granular or powdery fertilizer, inorganic mineral, etc.

 

Principle of operation

    The steam heated tube bundle slowly rotates in a fixed housing and conveys the product to be dried axially through the dryer. Shovels transport the product along the circumference of the housing, where it falls through the heated tube bundle for each rotation.
    The economic and gentle drying is achieved by contact with the tubes and convection. The heat source is typically saturated steam between 4 - 10 barg, solutions with lower steam pressure are available.

Advantages

·Drying only with indirect steam and sweep ambient air, means no pollution to your product.
·Low installation costs through modular design and pre-manufacturing.
·Gentle drying through low temperatures.
·Low energy consumption in the range of 1,25 to 1.3 lbs of steam/lbs of water evaporation.
·Optimal sealing and insulation secure high wet-bulb temperatures and optimize energy recovery up to 67% in further processes.
·Safe process: minimized oxygen content ensures the lowest explosion and fire risk. ATEX design if required.
·Clean and environmentally friendly: Integrated dust collector to minimize dust emissions to the atmosphere - closed-loop systems are also available.
·Closed gas-tight system as well as design for drying below atmospheric pressure are possible.

Product Parameters

Model	GSD-300	GSD-500	GSD-800	GSD-1000	GSD-1200	GSD-1500
Area(m^2)	300	500	800	1000	1200	1500
Power(kw)	30	45	75	90	110	132
Materials	Inlet moisture		Outlet moisture		Drying intensity kg H2O/m^2
Germ	55%		3-5%		2.5-3.5
Corn fiber	60%		10-12%		3.5-3.8
Yam fiber	65%		10-12%		3.0-4.5
Vinasse	65%		10-12%		4.5-5.0

Packaging & Shipping

 

1.Carefully check the quantity and quality of equipment before packing.
2.Good packed by plastic wrap.
3.Iron Frame, Suitable for land transport and sea freight.
4.Fittings and spare parts are packed in wooden pallet.
5.Add labels and shipping mark.

Fields of application

    Tube bundle dryers are used for various products, preferably when steam should be utilized as heating media and lowest temperatures are required.
    Tube bundle heat exchangers are employed in a wide range of applications as dryers, conditioners or desolventisers. Both granular as wells as slightly adhesive products can be dried in a tube bundle dryer. To be able to dry slightly adhesive products, the dryer is equipped with as specially developed recirculation system.
    To achieve an optimal operating behavior, each dryer is customized, e.g. the spaces between tube and tube diameters, shovel positions and filling levels inside the housing etc. are selected and adjusted to an optimum.
    According to requirements, it may be a useful supplement to run drying tests with the product to be dried - either on the customer's site or in a lab.

Certifications

 

    Our company has successively obtained the national standard pressure vessel manufacturing license, the pressure vessel design certificate, the ISO9001 certificate, the ISO14001 certificate, and obtained the ASME,CE,DNV, TR-620 certificates successively by cooperating with many international professional testing institutions such as BV, TUV, DNV, SGS.

Our Partners